Battery Pack	Battery runtime : approx. 6 hours
Battery Pack	Charge Time : 5 Hours
Battery Pack	Type : Lithium Ion
Charger	Car Charger : 12Vdc @ 1A with a cigarette lighter plug
Charger	Charging Input : 1- to 15Vdc
Charger	Mains Charger : Input : 100 to 240Vac, 05A, 50/60Hz Output : 12Vdc @ 1,5A
Charger	The AC charger supplied with the calibrator is only sufficient to charge the LI-Ion batteries. If you want to run the unit from AC, whilst taking measurements, a stronger bench power supply is required (e.g. 12V, 1Amp). This power supply should be of a good quality with a small AC ripple.
Environmental	Humidity : 0 to 85% (non-condensing)
Environmental	Operating Temperature : 0°C to 50°C
Environmental	Storage Temperature : -40°C to 60°C (including battery)
Physical	Size : 149 x 34 x 77mm without rubber boot, 155 x 43 x 85 with rubber boot
Physical	Weight : approx 340g
Protection	IP65 : Dust and Splash proof
Protection	UL94V-0 : Flame retardant ABS plastic

Measuring

Bridge Balance	-5 to 10.000 mV/V, impedance >1 MΩ, error limit 0.02 mV/V,
Current	0 to 24.000 mA, impedance ±17Ω, error limit 0.02% FS,
Insulation (50 V)	0 to 1000 MΩ, error limit 5% FS, resolution 1 MΩ
LC Display	-5 to 35.000mV, impedance <300Ω, error limit 0.01% FS,
Millivolts	-4.5 to 35.000 mVdc, impedance >1 MΩ, error limit 0.01% FS,
Resistance	0 to 2000Ω, error limits >0.03% FS, Resolution 0.1Ω
Voltage	0 to 20.000 Vdc, impedance >110 kΩ, error limit 0.01% FS,

Sourcing

Milliamps	0 to 24.000 mA, impedance maximum 600Ω, error limit 0.01% FS,
Millivolts	-5 to 50.000 mVdc, impedance minimum 500Ω, error limit 0.01% F